Tiny Audio C5 - Search and Select DAB;DAB+ Channels

Side8
1. Shortpress“FREQ/SF”buttontoenterFMtransmittingfrequency
selectionmode,

2. Thenuse“ROTARYENCODER”toselectyourfavoritevacant
frequency(basedonyourpastexperiencewithknownvacant
frequenciesinyourarea)whichyouwouldliketoreceivebyyour
carradio.

3. Onceitisselected,press“ROTARYENCODER”toconfirmandexit
orthescreenwillgobacktoDAB+modeautomaticallyafter3
secondsandtheselectedfrequencywillbeshownatthetopofthe
bluebar,e.g.TX108.0MHz.

Remarks:
“Vacantfrequency”meansthereisnoFMradiobroadcastingcontentornoise
whenthefrequencyisselected.

SearchandselectDAB/DAB+channels:

1. Pressthe“MODE”buttonuntil“DAB+Radio”modeisfound

2. Use“ROTARYENCODER”toselectthedesiredDAB/DAB+channel

3. Orin“DAB+Mode”,shortpress“MENU”buttontoenterPreview
Mode,use“ROTARYENCODER”toscrollupordowntoselectthe
desiredDAB+channelandpress“ROTARYENCODER”buttonagainto
select.

4. Youmayalsopressandholdthe“MENU”buttontoentermenuand
select“DABAutoscan”byusing“ROTARYENCODER”tore‐activate
the“AutoScan”processifyouneedtoupdatetheDAB+radio
channels.

Remark:Fornormaluse,youdon’thavetoperformthe“DABAutoscan”
everytimeyouusethecarDAB+radiounlesstherearenewlyaddedDAB+