5
OPERATION
The TEVO wireless system can be used as a standalone UFH or combined with hot water and radiators. By selecting the
thermostat system application during set up and pairing with the wiring centre, the system user case can be determined
easily.
With the TEVO wireless thermostat set to UFH control it will communicate with the selected zone/channel in the wiring
centre and activate the UFH loop, manifold circulating pump and heat source.
If the TEVO wireless thermostat has ‘hot water mode’ selected, the thermostat channel will act as a time switch and
control the hot water output terminals.
To Next Page
Loading...