Activation of the crystal
Activation of the setting
Selecting the "h-m-s" mode
(eg. 8 h 34' 20'')
Incrementation or decrementation
by one minute
Validation of the setting,
the seconds restart at zero
Validation of the setting,
the seconds continue normally
(1)
(1) Accuracy: -0.3 to +0.5 seconds / day.
(2) Pressing continuously on or allows
continuous advance of the setting.
After one complete revolution, the minute hand stops
and the hour hand advances in one hour steps.
(2)
+ or - 1 minute
or
1"
2"
To Next Page
Loading...
