What causes unusual noise in my Titan Cutter?
Unusual noise in your Titan Cutter can be caused by loose blade bolts or worn bushings, so tighten the bolts and check the bushings for wear, replacing them as needed. Bent blade carrier or blades can also cause unusual noises, so replace the blade carrier. Additionally, a bent deck causing the blades to contact it can be the source, so straighten the deck.
Provides crucial information on safe operation, emphasizing the mandatory use of safety shields.
Defines the product's intended use, directional references, and serial number location.
Covers product improvements, end-of-life disposal, and contact for inquiries.
Covers general safety principles, hazard awareness, and the meaning of safety alert symbols and signal words.
Details safety icons, prohibited actions, hazard avoidance, and general operating safety instructions.
Emphasizes user training, OSHA requirements, and relevant federal laws for safe operation.
Provides a form for record-keeping to confirm personnel have read and understood manual information.
Explains the importance of safety signs and provides instructions for their proper installation.
Illustrates and lists various safety signs, including their locations and descriptions on the cutter deck.
Details the rotary cutter's design, intended use, features, and proper storage of the operator manual.
Presents a diagram and list identifying the main components of the rotary cutter.
Lists the necessary tools for assembling the rotary cutter.
Provides step-by-step instructions for assembling the rotary cutter components.
Details the procedure for connecting the driveline and checking/adjusting its length.
Stresses user safety training and familiarization with operational and safety instructions.
Details tractor needs, safety devices, ROPS, hitch, PTO, and procedures for attaching/detaching.
Guides on setting cutting height and deck pitch for optimal cutting performance and terrain following.
Covers initial setup checklist, break-in checks, pre-operation checks, and the safe operation procedure.
Details critical operating safety measures, including hazards like crush, thrown objects, and fire.
Recommends chain shielding and provides safety advice for roadway mowing and areas with potential bystanders.
Provides essential safety instructions for transporting the rotary cutter on public roads.
Covers safety precautions, preparation steps for placing the unit in storage, and removal procedures.
Covers essential safety rules, personal protective equipment, and hazard warnings during maintenance.
Details procedures for greasing, driveline lubrication, and gearbox lubrication.
Covers blade inspection, removal, installation, sharpening, and blade carrier servicing.
Explains shear bolt replacement and procedures for checking and adjusting the slip clutch.
Covers critical bolt torque requirements and safety for welding repairs.
Provides a template for maintaining a service and maintenance record.
Provides a table listing common problems, their causes, and solutions for rotary cutters.
Lists technical specifications for various rotary cutter models, including horsepower, width, and capacity.
Details standard torque values for bolts and capscrews, emphasizing correct tightening.
Outlines the terms, conditions, and limitations of the manufacturer's limited warranty for rotary cutters.
Lists and illustrates parts for the tailwheel and hitch assemblies of the rotary cutter.
Details parts for deck assemblies and various driveline configurations.
Lists parts for gearbox and blade assemblies, crucial for cutter function.
Lists part numbers for optional chain shield kits for enhanced safety.
To Next Page
General
