Need help?Do you have a question about the Titan TTB336TCB and is the answer not in the manual?
Specific safety guidelines for operating tile cutters, including RCD use and disc selection.
Procedure for unpacking the tile cutter and checking package contents for completeness.
Instructions for assembling the tile cutter, including installing rubber feet and diamond disc.
Steps to install the protective guard, ensuring it moves freely and does not touch the disc.
Guidance on fitting the parallel guide to the working table for precise cuts.
Instructions on how to fill the water tank for effective cooling during cutting operations.
Procedure for connecting the tile cutter to the electrical supply, emphasizing voltage and earthing.
Steps to perform straight cuts using the parallel guide and securing the tile.
Procedure for making angled or diagonal cuts using the mitre guide.
Guidance on cutting angles or bevels using the 45° vertical fence.
Instructions for replacing the fitted plug, including wiring colour codes and safety precautions.
Information on the responsible disposal of waste electrical products and recycling advice.
To Next Page
General
