Titan Implement, LLC 3 1200-1600 Series Rotary Cutters
(423) 334-0012 August 2016
Pre-Delivery Checklist
The Dealer should inform the Purchaser of this product of the Warranty terms, provisions, and procedures that
are applicable. The Dealer and Purchaser should review the contents of the Operator’s Manual including safety
equipment, safe operation and maintenance, review the Safety Signs on the implement (and tractor if necessary),
and the Purchaser’s responsibility to train their operators in safe operation procedures.
• IMPLEMENTS: I have explained that Defl ectors, Guards, or Shields must be installed and maintained in good
repair.
• DRIVELINES: I have made certain that all driveline, gearbox, and other shields are in good repair and
fastened securely in place to prevent injuries from entanglement or thrown objects.
• MOUNTED IMPLEMENTS: I have explained that it is not possible to guard against thrown objects when the
cutter is lifted off the ground, and that operator is responsible for watching out for persons in the work area.
PRE-DELIVERY SERVICE
CHECK AND ADJUST OR LUBRICATE AS REQUIRED
See Operator’s Manual for Details
Inspection Performed - Warranty and Safety Procedures Explained - Installation Complete
LUBRICATION & HYDRAULICS
Gearbox Lubricant Level, Factory Filled
CUTTER
Check that Gearbox Bolts are Properly Tightened
Check that Blade Carrier Bolt is Properly Tightened
and Cotter Pin is in Place
Review Procedure to Adjust Cutting Height and Level
Check that All Hardware is Properly Tightened
Grease All Zerks
ATTACHMENTS & INSTALLATION
Make Sure The Chain Shielding (Optional) is Attached
Check that Blades are Installed in Correct Rotation
Direction
Make Sure All Bolts, Pins, and Nuts are Properly
Installed and Tightened
I have thoroughly instructed the buyer on the above-described equipment. This review included the Operation and
Parts Manual content, equipment care, adjustments, safe operation, and applicable warranty policy.
Date__________________ Dealer Rep. Signature_________________________________________
The above equipment and Operator’s Manual have been received by me, and I have been thoroughly instructed as
to care, adjustments, safe operation, and applicable warranty policy.
Date__________________ Owner’s Signature_________________________________________
CUTTER TO TRACTOR CONNECTIONS
Make Sure A-Frame Pivot & Links are Properly
Installed
Make Sure Lift Arms are Adjusted Equal
Pre-Operation Check Complete
SAFETY ITEMS
Make Sure Protective Shields are Properly Installed
Make Sure Safety Decals are Installed
Review Operator’s Manual (Supplied)
Make Sure Tractor PTO Shield is Installed
Make Sure S.M.V. Sign is Installed if Needed
(Customer Supplied)
ADMA Driveline Safety Manual Supplied
AEM Mower Safety Manual (Supplied in Canister)
AEM Mower Safety Video has Been Shown to
Purchaser
Cut Here to Remove Page or Make Copies of This Page
To Next Page
Loading...
Need help?
General
