To Next PageTo Next Page
Need help?Do you have a question about the Titan FLAIL Series and is the answer not in the manual?
General| Brand | Titan |
|---|---|
| Model | FLAIL Series |
| Category | Lawn Mower |
| Language | English |
Emphasizes thorough manual understanding, proper operation, and hazard avoidance.
Explains the safety alert symbol and the necessity of heeding its warnings.
Defines "DANGER" as severe hazards leading to death or serious injury.
Defines "WARNING" as hazardous situations potentially causing death or serious injury.
Defines "CAUTION" as hazardous situations causing minor or moderate injury.
Advises using lights and signals for visibility and safety on public roads.
Provides guidelines on safe transport speed relative to load weight and control.
Prohibits riders due to obstruction of view and risk of injury.
Recommends hearing protection to prevent impairment or loss from loud noise.
Stresses the need for full operator focus and avoiding distractions.
Warns that pressurized fluid can pierce skin, causing severe injury.
Details safe procedures for working with hydraulic systems, including pressure relief.
States labels are vital for safe operation and must be followed.
Alerts that gearboxes are shipped dry and require oil before operation.
Describes the mower's suitability for Category 1, 3-Point Hitch mounting and various tasks.
Specifies Category 1, 3 Point Hitch and maximum PTO horsepower for the tractor.
Outlines the process for unpacking and verifying the mower and its accessories.
Lists the specific tools needed for the mower assembly.
Refers to the appendix for correct bolt torque specifications.
Provides step-by-step instructions for fitting the boot sub-assembly.
Crucially warns to fill the gearbox with the correct SAE 90 gear oil before use.
Details how to correctly connect the mower to the tractor hitch.
Lists essential safety steps for shutting down the tractor before inspection or repair.
Covers disengaging PTO, clearance, speed, and using lights for safe transport.
Offers advice on clearing debris, mowing dry grass, and cutting height for best results.
Details critical checks like oil, bolts, blades, guards, and grease before starting to mow.
Explains how to adjust draw bars to ensure the mower is level.
Details adjusting the rear roller position to set the desired cutting height.
Describes the method to check belt tension by applying pressure and measuring deflection.
Outlines the procedure for adjusting and retightening components for correct belt tension.
Emphasizes safety measures like disengaging PTO and shutting off the engine before maintenance.
Details the process for replacing mower blades, ensuring rotor balance.
Advises on cleaning, inspection, and storing the mower to prolong its life.
Specifies SAE EP 90W Gear Oil and how to check and maintain the correct oil level.
Identifies bearing lubrication points and the type and quantity of grease required.
Lists key technical specifications for different mower models.
Provides solutions for prevalent issues such as belt slipping, vibration, and cutting problems.
Offers a comprehensive chart for correct bolt tightening torques based on size and grade.
Warns against improper gearbox oil levels, which can cause damage.
Alerts users to potential electric shock risks during certain operations.
Advises caution regarding sharp objects and using protective covers during maintenance.
Directs users to the website for detailed terms, limitations, and exclusions of the warranty.
