Titan 145FLAILDB User Manual

FLAIL DITCH BANK MOWERS
125FLAILDB, 145FLAILDB, 165FLAILDB, 200FLAILDB,
220FLAILDB
191519, 191520, 191521, 191525, 191526
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

Titan 145FLAILDB Specifications

General

Brand	Titan
Model	145FLAILDB
Category	Lawn Mower
Language	English

Summary

IMPORTANT SAFETY INFORMATION

SAFETY AT ALL TIMES

Follow all safety instructions and comprehend the manual before operation.

SAFETY ALERT SYMBOL RECOGNITION

The safety alert symbol indicates potential hazards; heed subsequent instructions carefully.

SAFETY ALERT WORD DEFINITIONS

SAFE TRANSPORT PRACTICES

EMERGENCY PREPAREDNESS AND PROTECTIVE GEAR

PROTECTIVE EQUIPMENT REQUIREMENTS

HIGH-PRESSURE FLUIDS AND TIRE SAFETY

HIGH-PRESSURE FLUID HAZARDS

Precautions for handling high-pressure fluids to prevent severe injuries.

SAFETY LABELS AND THEIR MEANING

ASSEMBLY AND SET-UP PROCEDURES

TRACTOR REQUIREMENTS

ASSEMBLY INSTRUCTIONS

OVERTURNING BRACKET ADJUSTMENT

Procedure for adjusting the overturning bracket on the main mower body.

INSTALLATION OF MAJOR ASSEMBLIES

TRACTOR HOOK-UP PROCEDURE

OPERATING INSTRUCTIONS

TRACTOR SHUT DOWN AND TRANSPORT

MOWING GUIDELINES

PRE-OPERATION INSPECTION

MOWER OPERATION AND LEVELING

ADJUSTMENTS

LEVELING THE MOWER

CUTTING HEIGHT ADJUSTMENT

BELT TENSION MANAGEMENT

MAINTENANCE PROCEDURES

KNIFE REPLACEMENT

Instructions and important notes for replacing mower knives.

V-BELT INSTALLATION

GEARBOX MAINTENANCE AND LUBRICATION

GEARBOX OIL LEVEL CHECK

LUBRICATION POINTS

SPECIFICATION & CAPACITIES

TROUBLESHOOTING COMMON ISSUES

BELT AND GRASS CUTTING PROBLEMS

Resolving belt slipping, patches of uncut grass, and excessive vibration.

SCALP, UNEVEN CUT, AND TRACTOR PERFORMANCE ISSUES

Addressing knife scalp, uneven cut, tractor overload, and gearbox problems.

BOLT TORQUE SPECIFICATIONS

PARTS DIAGRAM AND IDENTIFICATION