6
15
NAME AND FUNCTION OF EACH PARTNAME AND FUNCTION OF EACH PART
Angle adjustment of massage chair and ascending/descending
adjustment of legrest
Legrest stretching out button:
legrest stretching out by manual
regulation
Legrest retracting button:
legrest retracting by manual regulation
Backrest ascending button
Backrest descending button
legrest ascending button
legrest descending button
Memory function area
Three memory function buttons
A/B/C can be set repeatedly.
Memory function setting: Under normal working state, keep pressing
any button of A/B/C over 4 seconds, the current massage function
combination will be stored into its corresponding button, at this
moment, the LED is flashing and MEMORY SETTING is displayed.
When memory setting is finished, the VFD display screen will show
MEMORY OK .
Memory function calling: After pressing button, the A/B/C three
memory buttons are flashing, press any one of them, then the memory
storing function of this button will be recalled.
Caution: Body shape and shoulder position sensing data can not be stored.
Manual function area
PREPARATION BEFORE USEPREPARATION BEFORE USE
Move method
The massage chair can be easily moved with the caster installed at
the bottom of the chair.
Ascend the backrest to the highest position.
Turn off the power supply switch and pull out the plug.
Raise the first part of the chair as shown on the picture below, and
move the chair to a desirable place.
Caution
Do not move the chair when people sitting on it.
When move the massage chair, please hold its base and backrest
instead of its armrests (at least 4 people).
Turn on power supply
Put the power supply plug into a well grounding three-core power
supply socket.
Turn on the power supply switch installed at the lower part of backrest.
Before starting up the massage chair, please make sure the power
supply cord and exposed electric wire have not been damaged.
Before putting plug into the power supply socket, please make sure
the power supply switch has been turned off.
Caution