EasyManuals Logo

Titan T1400 User Manual

Titan T1400
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
- 7 -
hose with the blower, change the bag if it is full, and clean the motor filter when it is
dirty.
Disposable Dust Bags and Filters
The dust bag and motor filter play a very important roll in the efficiency of the vacuum
cleaner. The purpose of the dust bag is to trap dirt, but at the same time, the paper
bag must be porous enough to allow air to pass through. If the bag or the motor filter
become clogged, no air can pass through the cleaner and no cleaning can take place
regardless of how powerful the unit is. To keep the cleaner operating at maximum
efficiency, change the dust bag frequently and clean the filter as needed. Some fine
particles can restrict airflow very quickly and will decrease performance even before
the bag appears to be full. For that reason, when vacuuming carpet fresheners or
cleaners, powder, plaster dust, or similar fine substances, the bag and filter may need
to be changed more often.
How to Remove Dust Bag
NOTE: Turn off vacuum and unplug the electrical cord before changing dust
bag or cleaning motor filter. Never operate the vacuum cleaner without
the dust bag or filter.
1 . Turn off and unplug cleaner.
2. Open bag cover by pushing
latch up with fingers and lifting
bag cover.
3. Locate dust bag frame handle.
Raise dust bag out of dust
bag compartment.
4. Remove dust bag from dust bag frame.
How to Install Dust Bag
NOTE: Turn off vacuum and unplug the electrical cord before changing dust

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Titan T1400 and is the answer not in the manual?

Titan T1400 Specifications

General IconGeneral
BrandTitan
ModelT1400
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals