9
TT5MTP26-2
Getting Started . . .
Emergency
Familiarise yourself with the use of this machine by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will
help to prevent risks and hazards.
>
Always be alert when using this machine, so that you can recognise and handle
risks early. Fast intervention can prevent serious injury and damage to property.
>
Stop the engine and disconnect the spark plug connector if there are
malfunctions. Have the machine checked by a qualied professional and repaired,
if necessary, before you operate it again.
> In case of re stop the engine and disconnect the spark plug connector. Take
re-extinguishing measures immediately if the machine switch is no longer accessible.
WARNING! Never use water to extinguish the machine on re. Burning fuel
must be extinguished with special extinguishing agents! We recommend that you
keep a suitable re extinguisher within reach in your work area! We recommend
to have dry powder re extinguisher always available.
Residual risks
Even if you are operating this machine in accordance with all the safety requirements,
potential risks of injury and damage remain. The following dangers can arise in
connection with the structure and design of this machine:
>
Health defects resulting from vibration emission if the machine is used over long
periods of time or not adequately managed and properly maintained.
>
Injuries and damage to property due to broken application tools or the sudden impact
of hidden objects during use.
> Danger of injury and property damage caused by ying objects.
> Burns, if touching hot surfaces.
WARNING! This machine produces an electromagnetic eld during operation!
This eld may under some circumstances interfere with active or passive
medical implants! To reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their doctor and the medical implant
manufacturer before operating this machine!
Safety information
To Next Page
Loading...
Need help?
General
