Titan TTB631SDS User Manual

Lists specific exclusions for the 2-year guarantee.

Explains safety clutch mechanism for drill bit jamming.

Importance of securing auxiliary and rear handles for control.

Use on firm ground, avoid ladders, proper posture.

Adhere to maximum drilling sizes and avoid heavy core drilling.

Keep area clean, well-lit, avoid explosive atmospheres, keep bystanders away.

Proper plug use, avoid wet conditions, cord care, extension cords, RCD use.

Stay alert, use PPE, prevent unintentional starting.

Remove keys, proper footing, dress code, dust extraction.

Don't force, check switch, disconnect power, store safely, maintain tools.

Use qualified repair, only identical parts.

Ear protection, auxiliary handles, safety boots, gloves, securing bits, firm grip.

Check for hidden cables, avoid hot parts, warm up in cold, chemical caution.

Risks of silica, wood dust (lung cancer, silicosis, asthma).

WEL for dust, reduce cutting, use less powerful tools, alternative methods.

Explains HAVS directive and provides vibration data.

Factors affecting vibration and tips to minimize risk.

Employer's role in monitoring vibration-related diseases.

Explanation of double insulation for electrical safety.

How the torque limiter works and its function.

Explains 'Read Manual', 'Warning', 'Waste Disposal', PPE symbols.

Explains 'Double Insulation', 'CE', 'Manufacturing Date'.

Lists and describes parts like Fastening Sleeve, Depth Gauge, On/Off Switch.

Lists Lever Selector, Power Cable, Speed Switch, Auxiliary Handle, Dust Cover.

Lists and identifies various drill bits and chisel bits.

Voltage, input power, speed, impact rate, drilling capacity for masonry, steel, wood.

Chuck type, protection class, and machine weight.

Declared sound pressure and power levels, and threshold for ear protection.

Lists auxiliary handle, depth gauge, dust cap, chuck adapter.

Lists quantities of SDS masonry bits, coated drill bits, and chisels.

Describes the primary functions, limitations, and initial setup steps.

Step-by-step guides for attaching the auxiliary handle and depth gauge.

Procedure for fitting SDS bits or chucks into the tool.

Steps to detach SDS bits/chucks and how to use the key chuck.

Functionality of speed switch and setting for standard drilling.

How to set the tool for hammer drilling into masonry or concrete.

How to set the tool for chisel work using hammer action.

Proper use of dust cover and procedure for tool lubrication.

Advice on bit quality, pressure, pilot holes, alignment, avoiding wires.

How to clean, store, maintain ventilation, and handle cord replacement.

Guidance on proper disposal of electrical products and recycling.

Instructions for replacing the fuse and wiring a new plug.

Lists directives, standards, and technical specifications the product complies with.