Titan TTCSP40 - Stopping; Storage; Intended use

28
TTCSP40
Getting Started . . .
Stopping
Release throttle trigger
and throttle trigger lock-
out
Set stop switch to 0
position
Engage the chain brake
Storage
Empty fuel tank Empty oil Clean and maintain Store
WARNING! This quick start provides only a short overview of how to start
and stop the product! For safe use it is essential to read the entire instruction
manual before rst use!
Intended use
This petrol chain saw TTCSP40 is designated with a power output of 1.5 kW. The product
is intended for cutting logs and limbs with a thickness of max. 37 cm (see “Technical
specications”).
WARNING! The product may be used by an experienced operator* having
read and understood the safety requirements provided within this instruction
manual using appropriate personal protective equipment (PPE)!
Quick start