To Next PageTo Next Page
Need help?Do you have a question about the Titan TTCSP40 and is the answer not in the manual?
General| Power Source | Petrol |
|---|---|
| Bar Length | 40 cm |
| Chain Speed | 21 m/s |
| Weight | 5.5kg |
| Engine Type | 2-stroke |
| Engine Displacement | 40cc |
| Chain Pitch | 0.325 inches |
| Chain Gauge | 1.3 mm |
| Fuel Tank Capacity | 0.31 liters |
| Oil Tank Capacity | 0.21 liters |
General warnings and precautions for operating the petrol chain saw safely.
Specific safety advice for the operation of petrol-powered chain saws.
Details on required personal protective equipment for safe operation.
Guidelines for the safe handling and storage of fuel.
Initial steps and advice for preparing to use the product.
Lists all items included in the product package.
Provides general dimensions, weight, and capacity details.
Technical details specific to the engine.
Information on noise output levels.
Data on vibration levels during operation.
Steps for unpacking the product and checking contents.
Instructions for assembling the chain saw.
Guide on how to attach the guide bar and chain.
Procedure for adjusting the saw chain tension.
Instructions for filling the chain oil reservoir.
Steps for performing an initial operational check of the oiling system.
Guide on how to mix and fill the fuel and oil.
Identification and location of all product controls.
Key steps before starting the engine.
Step-by-step guide to start the engine.
Procedures for safely stopping the product.
Guidelines for storing the product.
Defines the product's designed purpose and limitations.
Overview of safety features on the product.
Explanation of the chain brake and front hand guard function.
Procedure to test the chain brake functionality.
Function of the throttle trigger lock-out mechanism.
Purpose and function of the chain catcher.
Detailed steps for starting the engine.
Specific procedure for starting a cold engine.
Specific procedure for starting a warm engine.
Actions after the engine has started.
Steps to properly stop the engine.
General guidance for operating and cutting.
Explanation of kickback and its dangers.
Specific tips to prevent kickback accidents.
Instructions for safely felling a tree.
How to make the initial notch for felling.
Procedure for making the felling back cut.
Steps for removing branches from a fallen tree.
Advice for cutting spring poles.
Techniques for cutting logs into lengths.
How to safely remove a saw that is stuck.
Post-operation checks and procedures.
Fundamental principles for product maintenance.
General instructions for cleaning the product.
Specific steps for cleaning the product's exterior.
How to clean the saw chain.
Instructions for cleaning the guide bar.
Schedule for inspecting and maintaining parts.
Maintenance procedures for the sprocket wheel.
Tips for maintaining the guide bar and saw chain.
Guide on how to sharpen the saw chain.
Procedures for inspecting and cleaning the air filter.
Information on the fuel filter.
Steps for inspecting, cleaning, and replacing the spark plug.
Information on carburetor adjustment.
Procedures for modifying or replacing the silencer.
List of available spare parts and their specifications.
Guidance on product repair procedures.
Instructions for proper product storage.
Guidelines for storing the product for brief periods.
Procedures for storing the product for extended periods.
Safety instructions for transporting the product.
Common causes and solutions for starting issues.
Diagnosing and fixing issues with engine speed.
Causes and solutions for excessive engine smoke.
Troubleshooting steps when the chain doesn't engage.
Addressing chain movement before trigger activation.
Solutions for problems with chain oiling.
Overview of the repair service and its benefits.
Explains the process for using the repair service.
Contact information for customer support.
