What to do if my Titan Chainsaw does not start?
If your Titan Chainsaw doesn't start, first ensure it's properly connected to a power supply. If it is, the power cord or plug might be defective, or there could be another electrical issue with the product. In such cases, it's recommended to have it checked by a specialist electrician.
How to improve the cutting performance of my Titan TTL758CHN Chainsaw?
If you're experiencing unsatisfactory cutting performance with your Titan Chainsaw, it may be due to the saw chain not being tensioned properly. Make sure to tension it correctly. Also, a blunt saw chain can cause this issue, so you should sharpen or replace the saw chain.
Why is my Titan TTL758CHN not reaching full power?
If your Titan Chainsaw isn't reaching full power, it could be due to several reasons. First, check if you're using a suitable extension cord for operation. If not, use a proper one. Another reason may be that the power source, like a generator, has too low voltage; if this is the case, connect to another power source. Lastly, ensure that the air vents are not blocked, and clean them if necessary.
What to do if my Titan TTL758CHN Chainsaw has excessive vibration or noise?
Excessive vibration or noise in your Titan Chainsaw can be caused by a dull or damaged saw chain. If this is the case, replace it with a new one. Another cause could be loose bolts or nuts, so make sure to tighten them.
General| Engine Type | 2-stroke |
|---|---|
| Engine Displacement | 58cc |
| Bar Length | 20 inches |
| Fuel Tank Capacity | 550 ml |
| Oil Tank Capacity | 260 ml |
| Power Source | Petrol |
| Chain Speed | 21 m/s |
| Guide Bar Length | 20 inches |
| Chain Pitch | 0.325 inches |
| Chain Gauge | 0.058 inches |
Comprehensive safety warnings and guidelines for safe product use, covering general, electrical, personal, and work area safety.
Identification and overview of the electric chain saw components, including a detailed parts diagram.
Essential pre-operation steps including unpacking, assembly, chain tensioning, lubrication, and power connection.
Details on intended use, chain brake mechanism, and testing procedures for safe operation.
Instructions for general use, cutting procedures, kickback prevention, felling, limbing, and bucking logs.
Guidance on cleaning, maintenance of parts, sharpening, storage, repair, and cord replacement.
Solutions for common issues such as starting problems, power loss, and unsatisfactory cutting performance.
Instructions for environmentally responsible disposal of electrical waste products.
Information on the product's warranty period, terms, and conditions.
Key technical data including voltage, power, dimensions, noise, and vibration levels.
Statement of compliance with relevant European directives and standards.
To Next Page
