38
TTL758CHN
In
more
detail...
EN
Care and maintenance
The golden rules for care
General cleaning
Keep the product clean. Remove debris from it after each use
and before storage.
Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
Inspect the product before each use for worn and damaged
parts. Do not operate it if you nd broken and worn parts.
1. Clean the product with a dry cloth. Use a brush for areas that are
hard to reach.
2. In particular clean the air vents (19) after every use with a cloth
and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar).
4. Check for worn or damaged parts. Replace worn parts as
necessary or contact an authorised service centre for repair
before using the product again.
NOTE: Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this product
as they might be harmful to its surfaces.
WARNING! Always switch the product o, disconnect it
from power supply and let the product cool down before
performing inspection, maintenance and cleaning work!
WARNING! Only perform repairs and maintenance work
according to these instructions! All further works must be
performed by a qualied specialist!
1
2
3
To Next Page
Loading...
Need help?
General
