26
TTL758CHN
In
more
detail...
EN
Product functions
Intended use
Chain brake
1. This electric chain saw TTL758CHN is designated with a rated
input of 2000 Watts. The product is intended cutting logs with a
thickness of max.350 mm. It must not be used for cutting other
materials, such as plastic, stone, metal or wood that contains
foreign objects.
2. The product may only be used with the guide bar/saw chain
combination stated in these instructions. It is not permitted to use
other types or sizes.
3. Vertical and horizontal cuts can be performed with this product.
Longitudinal sections can only be cut by professionals.
4. This product should not be used outside of domestic premises
e.g. for cutting rewood in forested areas.
5. This product is intended for private domestic use only, not for
any commercial trade use. It must not be used for any purposes
other than those described.
1. The chain brake is a safety mechanism activated by the front
hand guard (2). When kickback occurs, the saw chain stops
immediately.
Fig. 5a
1). The chain brake in the
disengaged position, the product
can be operated (Fig. 5a).
Fig. 5b
2). The chain brake in the
engaged position, the saw chain
is stopped as soon as the chain
brake is activated (Fig. 5b).
To Next Page
Loading...
Need help?
General
