4
The
placement
of
the
machine
a)
Find
a
location
for
your
ice
maker
where
it’s
protected
from
direct
sunlight
and
other
on.
f)Clean
the
interior
with
lukewarm
water
and
a
soft
cloth
or
clean
the
unit
using
the
higher than 40℃(104ºF), ensure there is at least 5.9 inches / 15 cm
of space between the back and sides of your unit and the wall.
c) The machine should be placed on a stable place.
d) Please do not put anything on top of the machine.
sources of heat (i.e. stove, furnace, radiator). Place the ice maker on a level surface. Make
sure that there is at least 5.9 inches / 15 cm
of space between the back and sides of your ice maker and the wall.
b) The ambient temperature around the machine should not be lower than 3℃(37.4ºF),not
e)After you unpack the machine, we recommend you to leaving it for 24 hours before turning it
Self-
Clean
function.
g)The
appliance
must
be
positioned
where
the
plug
is
accessible.
Installation
and
connection
NOTE:
Installation
must
be
operated
according
to
the
manual
by
a
professional.
Water
connection
of
the
If you have any questions about the installation and connection, we can send the
tutorial video to you, pls contact us: Support email: Support@tittla.com
Phone number:+1(510)228-4672
machine
Warning:
a.The
ice
machine
can
only
be
connected
to
a
drinking
water
source,
and
the
water
source
must
comply
with
local
drinking
water
standards.
b.The
water
supply
to
the
ice
maker
must
be
connected
to
a
filter
to
improve
the
drinking
standard
of
the
water.
Please
do
not
directly
connect
to
tap
water.
c.
The
water
supply
pressure
should
be
within
14.5-58psi,
if
the
pressure
is
greater
than
58psi,
a
pressure
reducing
valve
needs
to
be
connected.
d.
The
machine
is
drained
by
its
own
weight,
so
the
drain
pipe
should
have
sufficient
height.
To Next Page