TK Home Solutions B.V. User’s manual S100 Call module
Reference: 012 – 1122596 Call module user manual partially page 5 of 6
Version: A.1
State: Unreleased
1.2 Disconnecting
1. Press the yellow alarm button for 4 to 7 seconds. The light on the alarm button
turns off.
The call has now ended. It is also possible for the person being called to hang up.
1.3 Choosing the next number
If the connection to the first contact fails, you can choose to go to the next pre-
programmed number. This is done as follows:
1. During the call, press the yellow alarm button once briefly. The next number will
now be dialled.
NOTE
If the contact’s number redirects to voice mail, you must also briefly press
the yellow alarm button once to call the next number.
To Next Page
Loading...
