Command：noacc123456
Reply：acc set ok
4.7 油路控制设置：
Cut off the Oil and Power setting：
Command：stop123456
Message Reply：stop ok
It will stop your car engine as well, at the same time. It will remain the immobile
state until receiving the next SMS command of resuming the oil and power once
receiving SMS command to cut off the oil and power system.
Resume the Oil and Power setting：
Command：resume123456
Message Reply：resume ok
Note: Only when you install Relay, Oil-cut command come into effect.
油路控制指令需要安装继电器
(Relay )
后才能生效，
4.8 Terminal (local) Time Setting(factory setting GMT 0)
Command：timezone123456 local time zone
Reply：time ok!
E.g： timezone123456 +1timezone123456 -1Timezone123456 0
4.9Reset Hardware
Command：begin123456
Reply：begin ok
E.g：
5. EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
To Next Page
Loading...
