Need help?Do you have a question about the TL Audio 5001 and is the answer not in the manual?
Connects the unit to the mains power supply via an IEC connector and details wiring and fuse requirements.
Details the female 3-pin XLR connectors for balanced low impedance microphones and their pinout.
Details the +48V phantom power switch and provides a critical caution for its use.
Describes the variable gain range (+16dB to +60dB) and its application for different microphone sensitivities.
Details the output level control as a fader for matching levels and controlling signal for recording.
General| Inputs | XLR, 1/4" TRS |
|---|---|
| Outputs | XLR, 1/4" TRS |
| Phantom Power | Yes |
| Power Supply | Internal |
| Type | Vacuum Tube |
To Next Page
