How to fix burned out UV lamp in TMA Laboratory Equipment?
To address a burned-out UV lamp, first, disconnect the TMA Laboratory Equipment from the power supply. Then, replace the UV lamp. This issue often arises due to the lamp reaching the end of its lifespan, whether from extensive working hours or frequent on-off cycles.
What to do if UV lamp electrode glows red or yellow in TMA Laboratory Equipment?
If the UV lamp electrode glows red or yellow, it indicates that the UV lamp is damaged or depressurized. Disconnect the TMA Laboratory Equipment from the power supply and replace the UV lamp.
General| Brand | TMA |
|---|---|
| Model | V Series |
| Category | Laboratory Equipment |
| Language | English |
Details the various uses and industries where the UV sterilizers are applied.
Explains the core components, materials, and operational principles.
Lists detailed technical data, dimensions, power, and performance parameters.
Critical safety instructions for operation, UV radiation, power, and grounding.
Step-by-step guide for proper installation and assembly of the sterilizer chamber.
Instructions for correctly mounting and connecting the electrical enclosure.
Detailed procedure for connecting a solenoid valve to terminals 1 & 2.
How to connect alarm signal wires to terminals 1 & 2 for monitoring.
Instructions for connecting a remote switch to the ON/OFF terminals.
Explains the meaning of indicators and their corresponding problems for specific models.
Details display indications, causes, and solutions for advanced models.
Step-by-step procedure for safely replacing the UV lamp.
Procedure to reset the UV lamp replacement counter in alarm systems.
Instructions for removing, cleaning, and reinstalling the fragile quartz sleeve.
Identifies common problems, their causes, and recommended actions for resolution.
Visual guide for assembling sterilizers using mounting brackets.
Visual guide for mounting the electrical enclosures for specific models.
Step-by-step graphical instructions for assembling these specific models.
Step-by-step graphical instructions for assembling these specific models.
Step-by-step graphical instructions for assembling the V120 model.
To Next Page