Injection Molding Machine Chapter 5
V3.0
5-7
2. Electrical Control Part
2.1 Description on Warning screen
Screen 5-1
When alarm happens
，
alarm red light lit and buzzer sounded
，
alarm number and message are indicated
on the massage area. If no action is taken for a period of time
，
alarm screen will be displayed
automatically. The operator shall perform trouble shooting in accordance with the descriptions on the
alarm page. After remedy is made
，
open and close front operation gate once or press button to
reset alarm. If button is pressed before malfunction is solved
，
alarm sound can be stopped
，
however
，
alarm is not cleared and the machine cannot be in operation.
To Next Page
Loading...