TMC 30E - Page 49

Injection Molding Machine Chapter 4
V3.0
4-7
2.1 Main menu
Main menu screen is classified into three options
，
and accessing is controlled by different
password. After starting the machine
，
the password level is set to first
，
e.g. password 1. If you
want to get into a certain screen
，
and the password is required
，
the system will prompt
automatically “Lock mode key in password ”
，
when the correct password is entered
，
accessing to the screen is allowed.
10h25m10s
20°C
CHARGE
TEMPERATURE
MEMORY
MACHINE MONITOR
SPC
CLAMPING
EJECTION
INJECTION
CORE
PASSWORD 1
MAIN
MENU
100.0mm
50.0mm
TEMPERATURE PAR.
BACK PRESS. GRAPH
EXTERNAL I/O
CHANGE LOG
ALARM LOG
MAINTENANCE
INJ. GRAPH
MOULD ADJ.
AUTO PURGE
CHARGE PAR.
MOULD SUPPORT
FUNCTION
PROD.MANAGEMENT
CLAMPING PAR.
EJECTION PAR.
CORE PAR.
INJECTION PAR.
ACTION STATUS
PASSWORD 1
M:
1.0mm
PASSWORD 2
110.0mm
AI ADJ.
DIAGNOSTIC
INTERNAL I/O
P/V RAMP
T/C
0/ 0
0/ 0 0/ 0
PASSWORD 3
P1: P2:
0/ 0V1: V2:
E2007
03D05M07Y
3W
Screen 4-4
The ex-factory password 1 is set to 1
，
the password 2 is set to 2. Please contact TMC or the
local agent to get password 3.