Injection Molding Machine Chapter 4
V3.0
4-37
Ｆ
P.W. ? SET
：
Factory default
password
1 is 1
，
password 2 is 2.
Ｇ
ALARM T.
：
The time for alarm sound ON
，
ALARM INTERVAL T. is intermittent time for
alarm sound OFF
，
different values can be set for different machines for identification when
several machines issue alarms at the same time.
Ｈ
COUNT RESET
：
If it is set on
，
the number of preset total and lot count would be reset on
the PROD.MANAGEMENT.
Ｉ
BUZZER DISABLED
：
Disable alarm buzzer when alarm is active
，
but keep the alarm light
flashing.
Ｊ
SCREEN PRINT
：
Set on in order to print present screen to usb disk(in BMP format).
Ｋ
SPC.PRINT
：
Set on in order to print SPC data to usb disk.
To Next Page
Loading...