TMS Lewis Coffee Table User Manual

Made In China
1/11
ASSEMBLY
REQUIREMENTS
2 HOURS
Assembly Time
(Approximate)
2 -Person Assembly
Tools Required (Not Provided):
Phillips Screwdriver
Flat-head Screwdriver
Thank you for purchasing our product!
Please refer and use this assembly instruction to assemble the product.
Contact our customer service department in case there are any missing or damage parts or hardware.
Replacement parts are normally shipped within 2 or 3 days.
We appreciate your business!
ASSEMBLY PREPARATION
1. Remove all packaging materials, staples and packing straps from the carton.
2. Refer to Parts List and Hardware List and ensure they are complete before you start assembling.
3. Place all wooden parts on a clean, flat and soft surface (e.g. carpet or rug) to prevent parts from getting scratched.
SAFETY PRECAUTION:
1. KEEP ALL HARDWARE PARTS OUT OF REACH OF CHILDREN.
2. DISPOSE PLASTIC PACKAGING MATERIAL IMMEDIATELY TO AVOID ANY RISK OF SUFFOCATION TO
CHILDREN AND ANIM
ALS.
TIPS FOR ASSEMBLY:
1. Allow ample room for assembly and in close proximity to where product will be placed.
2. Assemble the product on a surface that does not scratch or damage the exterior gloss and finish of the furniture.
3. Please check all of the parts and quantities are included before assembly. Contact customer service for missing parts.
4. Identify all of the parts, hardware and quanti
ties required for each step.
5. During assembly, do not over-tighten any fittings as this may cause damage.
6. DO NOT USE POWER TOOLS TO ASSEMBLE THIS PRODUCT.
7. Always place the product on a flat surface.
8. Do not sit or stand on the partially assembled product; only use the product for which it is intended.
This product is for indoor and household-use only - not for commercial use.
CARE AND MAINTENANCE
• Use a slightly damp cloth to clean the product. Do not use bleach or abrasive cleaning material.
• Check all the fittings periodically and re-tighten as necessary. Do not use the product if any of the parts is
damaged or broken.
• Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to warp or delaminate.
• Do not place hot items (e.g. hot drinks) directly onto the wood surface.
• Do not drag and/or pull the furniture.
ASSEMBLY INSTRUCTIONS
Coffee Table

TMS Lewis Coffee Table Specifications

General

Type	Coffee Table
Shape	Rectangular
Height	18 inches
Width	36 inches
Weight Capacity	50 lbs
Material	Wood
Color	Brown

Summary

Assembly Preparation and Safety

Assembly Preparation Steps

Instructions for preparing the assembly area and parts before starting construction.

Safety Precautions

Essential safety guidelines to follow during assembly, especially regarding hardware.

Assembly Tips

Helpful advice for a smooth assembly process, including workspace and tool usage.

Care and Maintenance Guidelines

Recommendations for cleaning and maintaining the furniture after assembly.

Hardware and Parts Identification

Hardware List

List of all hardware components required for assembly, with item codes and quantities.

Parts and Assembly Overview

Visual overview of all furniture parts and their general arrangement during assembly.

Detailed Parts List

Comprehensive list of all furniture parts with descriptions, part numbers, and quantities.

Component Assembly Instructions

Cam-Bolt and Cam-Lock Mechanism

Detailed instructions and diagrams for using cam-bolts and cam-locks correctly.

Step-by-Step Assembly Guide

Sequential instructions for assembling the coffee table, starting with drawer components.

Drawer Assembly Completion

Final steps for assembling the drawer unit, including bottom and back panels.

Main Body Assembly

Instructions for attaching side panels and back panel to form the main structure.

Connecting Base and Legs

Steps for attaching the legs and connecting bases to the main structure.

Final Assembly and Drawer Insertion

Completing the assembly by attaching the top panel and inserting the drawers.