EasyManua.ls Logo

TN’G 150cc - Pre-Ride Checklist

TN’G 150cc
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
F: PRE-RIDE CHECKLIST
1. CHECK THE FUEL LEVEL.
- Check the fuel gauge.
- If fuel is needed refer to directions on page 20 of this manual
NOTE: Always turn the engine off prior to refueling the scooter. Always use 90 octane gaso-
line or higher to refuel the scooter.
2. CHECK THE BRAKE LIGHT.
- Turn the ignition key to the “ON” position.
- Grip the front brake lever or rear brake lever while watching the rear brake light to make
sure that it illuminates.
3. CHECK THE TURN SIGNALS.
- Turn the ignition key to the “ON” position.
- Move the turn signal control to the left and right positions. Check the front and rear turn
signal lamps flash, as well as the turn signal indicators on the instrument panel.

Related product manuals