To Next PageTo Next Page
Need help?Do you have a question about the Toa A-2060 CU and is the answer not in the manual?
Description of the front panel layout and its components.
Description of the rear panel connections and controls.
Details on connecting microphones, TEL, and AUX inputs.
Instructions for connecting speakers to low impedance, 25V, or 70V lines.
Practical examples of connecting various external audio equipment.
Description of the front panel layout and its components.
Description of the rear panel connections and controls.
Details on connecting microphones, TEL, and AUX inputs.
Instructions for connecting speakers to low impedance, 25V, or 70V lines.
Practical examples of connecting various external audio equipment.
Power| power source | 120 V AC, 60Hz |
|---|---|
| rated output | 60W |
| power consumption | 72W |
| phantom power | DC+21V |
Audio Specifications| frequency response | 50-20, 000 Hz, ± 3 dB |
|---|---|
| distortion | Less Than 10% at 1kHz-1/3 Rated Power |
| S/N ratio | Over 60 dB |
| bass control | ±10 dB at 100Hz |
| treble control | ±10 dB at 10kHz |
Inputs and Outputs| mic 1 input | -60 dBV(1.0mV), 600Ω, Balanced, screw terminal |
|---|---|
| mic 2 input | -60 dBV(1.0mV), 600Ω, Balanced, screw terminal |
| tel input | -10 dBV(300mV), 10 kΩ, Transformer isolated Balanced, Screw Terminal |
| aux 1 input | -20 dBV(100mV), 10 kΩ, Unbalanced, RCA Pin Jack |
| aux 2 input | -20 dBV(100mV), 10 kΩ, Unbalanced, RCA Pin Jack |
| rec out | 0 dBV(1.0V), 600Ω, Unbalanced, RCA Pin Jack |
Weight and Dimensions| dimensions (mm) | 420(W) x 101(H) x 280(D) |
|---|---|
| dimensions (inches) | 16.5(W) x 4.0(H) x 11.0(D) |
| weight | 7.0 kg |
| weight (pounds) | 15.43 lb |
Power| power source | 120 V AC, 60Hz |
|---|---|
| rated output | 120W |
| power consumption | 124W |
| phantom power | DC+21V |
Audio Specifications| frequency response | 50-20, 000 Hz, ± 3 dB |
|---|---|
| distortion | Less Than 10% at 1kHz-1/3 Rated Power |
| S/N ratio | Over 60 dB |
| bass control | ±10 dB at 100Hz |
| treble control | ±10 dB at 10kHz |
Inputs and Outputs| mic 1 input | -60 dBV(1.0mV), 600Ω, Balanced, screw terminal |
|---|---|
| mic 2 input | -60 dBV(1.0mV), 600Ω, Balanced, screw terminal |
| tel input | -10 dBV(300mV), 10 kΩ, Transformer isolated Balanced, Screw Terminal |
| aux 1 input | -20 dBV(100mV), 10 kΩ, Unbalanced, RCA Pin Jack |
| aux 2 input | -20 dBV(100mV), 10 kΩ, Unbalanced, RCA Pin Jack |
| rec out | 0 dBV(1.0V), 600Ω, Unbalanced, RCA Pin Jack |
Weight and Dimensions| dimensions (mm) | 420(W) x 101(H) x 280(D) |
|---|---|
| dimensions (inches) | 16.5(W) x 4.0(H) x 11.0(D) |
| weight | 10.8 kg |
| weight (pounds) | 23.81 lb |
Power| power source | 120 V AC, 60Hz |
|---|---|
| rated output | 240W |
| power consumption | 238W |
| phantom power | DC+21V |
Audio Specifications| frequency response | 50-20, 000 Hz, ± 3 dB |
|---|---|
| distortion | Less Than 10% at 1kHz-1/3 Rated Power |
| S/N ratio | Over 60 dB |
| bass control | ±10 dB at 100Hz |
| treble control | ±10 dB at 10kHz |
Inputs and Outputs| mic 1 input | -60 dBV(1.0mV), 600Ω, Balanced, screw terminal |
|---|---|
| mic 2 input | -60 dBV(1.0mV), 600Ω, Balanced, screw terminal |
| tel input | -10 dBV(300mV), 10 kΩ, Transformer isolated Balanced, Screw Terminal |
| aux 1 input | -20 dBV(100mV), 10 kΩ, Unbalanced, RCA Pin Jack |
| aux 2 input | -20 dBV(100mV), 10 kΩ, Unbalanced, RCA Pin Jack |
| rec out | 0 dBV(1.0V), 600Ω, Unbalanced, RCA Pin Jack |
Weight and Dimensions| dimensions (mm) | 420(W) x 101(H) x 360(D) |
|---|---|
| dimensions (inches) | 16.5(W) x 4.0(H) x 14.2(D) |
| weight | 13.2 kg |
| weight (pounds) | 29.10 lb |
