Need help?Do you have a question about the Toa A-512A and is the answer not in the manual?
General| Power Output | 120 W |
|---|---|
| Power Source | AC 120 V, 60 Hz |
| S/N Ratio | 60 dB or more |
| Tone Control | Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz |
| Signal-to-Noise Ratio | 60 dB or more |
| Rated Output | 120 W |
| Frequency Response | 50 Hz - 20 kHz |
| Input Impedance | Mic: 600 Ω, Aux: 10 kΩ |
| Input Sensitivity | Mic: -60 dB, Aux: -20 dB |
Details on connecting speakers to 4 ohms, 25V, and 70V outputs via transformer.
Covers balanced low impedance and unbalanced high impedance microphone connections.
How to connect to an external 24V battery or DC source with negative ground.
To Next Page
