Need help?Do you have a question about the Toa A-1512 and is the answer not in the manual?
General| Total Harmonic Distortion | 1% or less (at rated output) |
|---|---|
| Input Impedance | 10kΩ |
| Power Source | AC 120 V, 60 Hz |
| Signal-to-Noise Ratio | 60 dB |
| Power Supply | AC 120 V, 60 Hz |
Explains safety symbols like WARNING and CAUTION used throughout the manual.
Essential safety guidelines for installing the amplifier to prevent hazards like fire and shock.
Important safety measures to follow when operating the amplifier to prevent damage or injury.
Details the functions and controls of the amplifier's front panel, including power, volume, and tone.
Lists and describes the various input/output jacks and terminals found on the rear panel of the unit.
Describes the muting and chime volume controls located on the bottom of the amplifier.
Step-by-step guide for making announcements using wired or paging microphones and zone selection.
Instructions on connecting and adjusting volume for external audio sources via the amplifier's AUX inputs.
Important precautions to follow during the amplifier installation process to ensure safety and proper function.
Explains low and high impedance speakers and their connection criteria for optimal performance.
Detailed instructions for connecting 2-wire, 3-wire, and low impedance speakers to the amplifier.
How to connect microphones and AUX audio sources, considering impedance and input levels.
Visual guide illustrating typical connection configurations for various audio sources and speakers.
To Next Page
