Need help?Do you have a question about the Toa A-1506 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Rated Output | 60 W |
| Total Harmonic Distortion | Less than 1% |
| Signal-to-Noise Ratio | 60dB (A-weighted) |
| Dimensions | 420 x 100 x 280 mm |
| Power Source | AC 50/60Hz |
| Input | 2 x RCA |
| Output | Speaker output |
| Tone Control | Bass and Treble |
| Input Impedance | 10kΩ |
| Output Impedance | 4Ω |
| Frequency Response | 50Hz - 20kHz (±3dB) |
Details critical safety warnings and precautions for installation and usage to prevent injury or damage.
Precautions regarding electrical hazards, proper usage, and environmental factors for safe operation.
Overview of the TOA A-1500 series PA amplifiers, their wattage, and suitability for paging/BGM.
Detailed explanation of all controls, indicators, and buttons on the front panel of the amplifier.
Description of input and output terminals, AC inlet, and speaker output connections on the rear panel.
Explanation of the Muting Level and Chime Volume controls located on the bottom view of the unit.
Instructions for making announcements using wired or optional paging microphones, including zone selection.
Guide on selecting and adjusting volume for external audio sources connected via AUX inputs.
Essential precautions for safe and proper installation, including grounding and ventilation.
Details on connecting low impedance and high impedance speakers, including impedance matching rules.
Guidance on connecting speakers using 2-wire and 3-wire methods for zone or all-zone broadcasts.
Specific instructions for connecting low impedance speakers, emphasizing total impedance requirements.
Guidelines for connecting microphones and other audio sources to AUX and MIC inputs.
A visual example illustrating how to connect various audio sources and microphones to the amplifier.
Detailed technical specifications for the A-1503, A-1506, and A-1512 amplifier models.
To Next Page
