EasyManuals Logo

Toa BG-115 User Manual

Toa BG-115
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MIXER POWER AMPLIFIER
BG-115
BG-130
OPERATING INSTRUCTIONS
The lighting flash with arrowhead within a
triangle is intended to tell the user that
parts inside the product are a risk of
electric shock to persons.
The exclamation point within a triangle is
intended to tell the user that important
operating and servicing instructions are
in the papers with the appliance.
TOA Corporation
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER. NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL

Other manuals for Toa BG-115

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toa BG-115 and is the answer not in the manual?

Toa BG-115 Specifications

BG-115

Power IconPower
output power15 W RMS
power consumption50 W
Audio Specifications IconAudio Specifications
frequency response50 - 20, 000 Hz (± 3 dB)
total harmonic distortion0.5 % or less, at 1 kHz, rated output
signal-to-noise ratio (mic)60 dB
Inputs IconInputs
mic input sensitivity and impedance1 mV (-60 dB) , 600 ohms, balanced
telephone page input sensitivity and impedance100 mV (-20dB), 10 kohms, balanced
program input sensitivity and impedance315 mV (-10 dB), 10 kohms, electrically-balanced
Outputs IconOutputs
balanced output4 ohms, 25&70 volts
moh output1 W (8 ohms)
output regulationLess than 2.0 dB, no load to full load
Weight and Dimensions IconWeight and Dimensions
dimensions210(w)x93(h)x276(d)mm
weight3.3 kg
colorBlack

BG-130

Power IconPower
output power30 W RMS
power consumption90 W
Audio Specifications IconAudio Specifications
frequency response50 - 20, 000 Hz (± 3 dB)
total harmonic distortion0.5 % or less, at 1 kHz, rated output
signal-to-noise ratio (mic)60 dB
Inputs IconInputs
mic input sensitivity and impedance1 mV (-60 dB) , 600 ohms, balanced
telephone page input sensitivity and impedance100 mV (-20dB), 10 kohms, balanced
program input sensitivity and impedance315 mV (-10 dB), 10 kohms, electrically-balanced
Outputs IconOutputs
balanced output4 ohms, 25&70 volts
moh output1 W (8 ohms)
output regulationLess than 2.0 dB, no load to full load
Weight and Dimensions IconWeight and Dimensions
dimensions210(w)x93(h)x276(d)mm
weight3.9 kg
colorBlack

Related product manuals