Toa MD-210CTU-EB - Page 3

3
10. Stop
Press this key to stop playing.
11. Skip + CUE
Press this key will skip to the next track.
Keeping pressing this key will fast-forward.
12. Skip - REV
Press this key will skip to the previous track.
Keeping pressing this key will fast-rewind.
13. Folder+
Press this key will skip to the next folder.
14. Folder-
Press this key will skip to the previous folder.
15. Mute
Press this key while playing to mute sound, text
appears "MUTE ON", press again to recovery
sound, text appears "MUTE OFF".
Note:
(15a): Available for CD/USB/SD only.
(15b): Available for CD/USB/SD/FM Tuner.
16. Repeat
Press this key will switch between: "REPEAT
TRACK
→
REPEAT FOLDER
→
REPEAT
ALL
→
PLAY ALL RANDOM
→
PLAY ALL".
17. A-B
When this key is pressed during play, the
beginning of time is marked. Press this key
one more time, the end of time is also marked,
and the set will play from the beginning to the
end cyclically. Press this key again to reset the
function.
18. Program
The tracks to be played and the order in which
they are played can be programmed.
Programming method: Press PROGRAM key to
enter the programming mode when the playback
is stopped.
Text appears "P-01 000 0000" (P-01: program
the first track to be played, 000: folder number,
0000: folder track number, the text ashing is the
current setting item)
First, use REV(12) or CUE(11) key to select the
folder where the first playback track is located,
press PROGRAM key to conrm, then use REV
or CUE key to select the track, press PROGRAM
key to complete the selection of the first
programmed playback track.
Next, use the REV or CUE key to select the
folder where the second track is located, press
the PROGRAM key to conrm, then use REV or
CUE key to select the track, press PROGRAM
key to complete the selection of the second
programmed playback track. And so on after that.
After the programming is finished, press the
PLAY(9) key to start playing the programmed
track repeatedly, press the STOP(10) key to quit
playing the programmed track repeatedly.
Press the STOP key to cancel the program
during programming.
If no action is taken for more than 20 seconds
during the programming process, the
programming mode will be temporarily exited and
the previous programming can be continued by
pressing the PROGRAM key.
19. ID3
Press this key during playback to choose to
display or not to display ID3 information.
20. CD/Tuner
Press this key to switch between CD mode
or tuner mode, and the indicator (7) or (21)
corresponding to the selected mode will light up.
21. Tuner indicator
Press CD/TUNER(20) key on remote controller
to change LED indicator.
(When tuner mode indicator light on, the function
keys on the remote controller are only available
for tuner.
22. Memory
Press this key to manually save the FM radio
station with up to 30 channels.
First use UP(24) or DOWN(25) key to select
the receiving frequency, press the MEMORY
key, then press the NUMBER key to select
which channel to save to, and finally press the
MEMORY key to conrm to nish saving.
23. ASM
Pressing this key continuously for a few seconds,
the tuner will automatically scan and memorize
FM radio stations(will saved 30 CH station radio).
24. Up
Pressing this key will increase the radio (FM)
reception frequency by 50 kHz. when this key is
pressed for a few seconds, the frequency will be
automatically scanned and stopped as soon as
a station is detected. (text appears "FM", radio
station frequency, "CH" number).
25. Down
Pressing this key will decreased the radio (FM)
reception frequency by 50 kHz. when this key is
pressed for a few seconds, the frequency will be
automatically scanned and stopped as soon as
a station is detected. (text appears "FM", radio
station frequency, "CH" number).
26. 1-9
In CD mode, press this keys to select the track
directly ( 1 - 9999 ).
In tuner mode, press this keys to select frequency
station radio has been saved.
27. 10/0
Press this key to change to channel station
number 10.
28. +10/--
Press this key once, the preset station number
will add 10.
Press this key for a few seconds, then the preset
station can be entered using the number keys.