4
29. Direct
This is a direct search function. Press this key
once, then use number key (0 - 9) to input the
station frequency, press direct key again to
conrm the frequency.
The tuner jump to this station. If the input
frequency is beyond the range or incomplet, the
tuner will display error.
30. RDS
Press these key to activate the radio data system
(RDS) . RDS is a standard communication
protocol for embedding small amounts of digital
information on conventional FM broadcasts.
RDS standardized several types of information
sent. One of them: time, radio station name and
program information.
Display text "PS NONE
→
PTY NONE
→
RT NONE
→
CT NONE
→
FREQ. RADIO".
* PS (name service program)
This is only eight static characters display that
represents the name of the radio station that
broadcasts it.
* PTY (type of program)
Allows users to find the type of program that is
being broadcast.
* RT (text radio)
This function allows a radio station to send
64-character free text that can be either static (like
a slogan) or synchronous with programming (such
as the title and artist of the song being played).
* CT (clock and date time)
Can perform a reception in the clock radio in a
car. CT can only be accurate for around 100 ms
from UTC (Universal Time Coordinated).
31. Sleep
When sleep key is pressed, the sleep function
is set and the sleep time in display will
ash for
5 seconds. The sleep time begins from the 90
minutes and change cyclically as shown below.
When the sleep time is set, the power is
automatically switch off after the sleep time.
Display:
"90
→
80
→
70
→
60
→
50
→
40
→
30
→
20
→
10
→
OFF Min"
The sleep function is cleared, if the sleep key is
pressed till the sleep time is not displayed on the
LC-Display.
32 MO/ST
Press this key to change sound audio of station
radio to mono / stereo system.
text appears "MONO" or "STEREO".
33. IR
Pick up signal from the remote controller.
34. FM Tuner display
FM Tuner status including FM band and channels
memory.
[Rear]
35. Antenna terminal
Connect to FM antenna (75 Ohms).
36. Tuner out stereo terminals
Provide stereo audio output of received radio
program (RCA jack).
37. Priority out stereo terminals
Provide stereo audio output in the following
priority: CD, USB, SD, FM (RCA jack).
38 CD/USB/SD out stereo terminals
Provide stereo audio output of CD/USB/SD
program (RCA jack).
39. DC jack
Connect to the attached power adapter.
Adapter: 100V-240V~ 50/60Hz 0.8A.
35 36 37 38 39
12V 2A
ANTENNA
TUNER OUT PRIORITY OUT CD/USB/SD OUT
Traceability Information for EU directive
Represented by TOA Electronics Europe GmbH
Süderstraße 282, 20537 Hamburg, Germany
Traceability Information for UK regulation
Represented by TOA CORPORATION (UK) Ltd.
Unit 7&8, The Axis Centre, Cleeve Road,
Leatherhead, Surrey, KT22 7RD, United Kingdom
MUSIC DEVICE WITH CD PLAYER
model MD-210CTU-EB
MADE IN CHINA
To Next Page
Loading...