11
Charging Instructions
1. Turn on the SmartPlane using the switch
on the underside of the plane and plug in
the charging cable.
2. You can charge the SmartPlane by plugging
it into a standard USB socket (e.g. on your
computer, power bank or a USB wall adapter).
The required voltage is 5V at 250 mA. You can use
a high power port (e.g. 5V 1A) without causing
damage. The SmartPlane will only use as much
power as it needs.
NOTICE: In case you use the USB port on your
computer make sure your computer is turned on.
To Next Page
Loading...
