-09-
CAUTION:
1. Do not assemble HEPA filter back until they are completely dry.
2. Turn anticlockwise to assemble them back.
)
drywet
Filter is suggested to be washed (air dry before installing back) every 2 weeks, to be replaced every 2 months,
otherwise, it will result in insufficient filter system and loss of suction.
Clean the Floor brush
Check the floor brush and clear the clog with tweezers.
Rinse the HEPA filter, mesh shell and the
exhaust sponge under tap water.
Air dry them for at least 24 hours. Do not
assemble it back until completely dry.
6 7
To Next Page
Loading...