TOGOAL GET06A-US - User Manual

1. Initial Setup
First Time Set Up
Press the reset button (R). The screen will turn blank,then will show
the reset display.
Tips: If the screen is blank, plug the timer into any outlet for 30
minutes to charge the internal battery.
2. Set the Digital Clock
When in the clock mode, press the
‘MODE’
button for once, the screen will
show AUTO, day, hour and minute. As
shown in “Figure 1”.
For example, set the time as 9:30AM Tuesday
While holding the
‘CLOCK
’ button down
press the ‘WEEK
’
button to adjust the
day to TU.
While holding the ‘CLOCK’
button down press the
‘HOUR
’ button to adjust
the hour digits to 9 .
While holding the ‘CLOCK’
button down press the
‘MlN
’ button to adjust the
minute digits to 30.
3. Daylight Saving Time
To switch between Standard Time and Daylight-Saving Time
(DST),press and hold the ‘CLOCK
’ button for 3s. An ‘S’ will
appear on the screen and the clock will increase by 1
hour when in DST. As shown in ‘Figure 2’.
4. Set the Timer
Press the ‘PROG’ button to enter the setting mode:
You will see 1 to the left of the display as shown in ‘Figure 3’.
For example, if you want to have the timer to come on at 8:30AM
and go off at 22:30 Monday thru Friday, please do the following:
ON
Step 2: Press the ‘HOUR’
button to adjust the hour.
Step 3: Press the ‘MIN’
button to adjust the minute.
Step 4: Press the ‘PROG’
button to set 1 time.
Repeat steps 1 - 3.
(Note:Do not forget to
press the ‘WEEK’ button
to select the desired days
for the off time, or the timer
may not go off as you
want.)
Step 6: Press the
‘CLOCK
’ button to exit
the setting mode and
plug the timer into a
powered outlet. The
timer is ready for use.
Step 5: Press the ‘PROG’
button to advance to the
next on/off setting
position. Repeat steps 1-4
to set more timers
according to your needs.
* Tips: To review the programs, press the ‘PROG
’ button
repeatedly. You can use the ‘DEL
’ button to cancel the settings
you don’t want, or press it one more time to restore.
IMPORTANT
OFF
Figure 2 Figure 3
Step 1: Press the
‘WEEK
’button to choose
the group of days you
wish to switch the
appliance on.
The group will advance in the sequence of:
MO -> TU -> WE -> TH -> FR -> SA -> SU ->MO WE
FR -> TU TH SA -> SA SU -> MO TU WE -> TH FR SA
-> MO TU WE TH FR -> MO TU WE TH FR SA -> MO
TU WE TH FR SA SU.
Figure 1
At the moment the timer is plugged into an outlet, the timer
may not come on immediately as per the setting if the digital
clock time falls between any on-off interval you set. Instead it
will stay off until the next on-off interval begins. For instance,
if you plug the timer into the outlet between 8:30~22:30, the
timer may not come on immediately even if you have set the
timer to come on at 8:30 every morning and go off at 22:30
every evening. Instead, it will stay off until 8:30am next
morning. Under this circumstance, if you want to have the
timer come on the moment it is plugged in and then work as
your program, please press the ‘MODE’ button repeatedly to
manually turn on the timer first and then press the button one
more time to put the screen back to AUTO.
•
Digital Timer Outlet
Model No.:GET06A-US
Questions or Concerns? enoverus@foxmail.com
TOGOAL
Safety Use & Care
Please keep this manual in a safe place for future reference.
DO NOT plug any appliance where the load exceeds 15Amps.
Heaters, pet feeders and similar appliances should never be
left unattended during operation. The manufacturer recommends
such appliances not be connected to timers.
DO NOT attempt to repair, disassemble or modify under any
circumstances.
FAQ
1. How long is the warranty for this product?
We offer a 12-month limited warranty on this timer. If your timer is
broken, please email your order number and describe the issue. We
will immediately issue a full refund or arrange a new replacement after
verification. We believe what makes us different is not just the product
we offer but also our outstanding customer service. We also believe
the buyer and seller can achieve a win-win outcome through mutual
effective communication.
2. What should I do if I am having trouble setting up the timer?
Please email to tell us the schedule and days of the week you want to
set up. Our technical support team will give you personal step-by-step
guidance illustrated with pictures.

Summary

Safety Information and Basic Setup

Initial Setup

Procedure to reset the timer and display the initial setup screen.

Set the Digital Clock

Instructions for setting the current day, hour, and minute on the timer.

Daylight Saving Time

How to switch between Standard Time and DST by holding the CLOCK button.

Set the Timer Programs

Guide to setting on/off times and days for the timer's programs.

Advanced Timer Functions

Manual Operation Modes

How to manually turn the timer ON, OFF, or set to AUTO mode.

Anti-theft Random Function

Activates a random 10-42 minute variation for on/off times to deter theft.

Countdown Function

Sets the timer to automatically turn on/off after a specified duration.

Technical Data

Specifications including voltage, rating, operating temperature, and accuracy.

Package Contents

Lists the items included in the product packaging.

Overview

1. Function Description
2. Usage Features
3. Initial Setup
4. Setting the Digital Clock
5. Setting the Timer (Programming On/Off Cycles)
6. Reviewing and Canceling Programs
7. Daylight Saving Time (DST)
8. Operating Modes (Manual Control)
9. Anti-theft Random Function
10. Countdown Function (1 minute to 5999 minutes)
11. Important Usage Notes
12. Important Technical Specifications
13. Maintenance Features

This document describes the TOGOAL Digital Timer Outlet, model number GET06A-US.

Function Description

The TOGOAL Digital Timer Outlet is designed to automate the switching of electrical appliances on and off at pre-set times. It features a digital clock, programmable on/off cycles, and a daylight saving time (DST) function. The timer can be programmed for specific days of the week or groups of days. It also includes an "Anti-theft Random Function" to simulate occupancy and a "Countdown Function" for temporary control. The device is intended for indoor use and should not be used with appliances exceeding its load capacity or those that require constant supervision, such as heaters or pet feeders.

Usage Features

Initial Setup:

To begin, press the reset button (R) to clear the screen and display the reset interface. If the screen is blank, plug the timer into any outlet for 30 minutes to charge the internal battery.

Setting the Digital Clock:

In clock mode, press the 'MODE' button once to display AUTO, day, hour, and minute.

1. Adjusting the Day: Hold the 'CLOCK' button and press the 'WEEK' button to cycle through the days (MO, TU, WE, TH, FR, SA, SU).
2. Adjusting the Hour: Hold the 'CLOCK' button and press the 'HOUR' button to set the hour.
3. Adjusting the Minute: Hold the 'CLOCK' button and press the 'MIN' button to set the minute.

Setting the Timer (Programming On/Off Cycles):

1. Enter Setting Mode: Press the 'PROG' button. The display will show "1ON".
2. Select Days: Press the 'WEEK' button repeatedly to choose the desired group of days for the timer to switch on. The groups advance in a specific sequence (e.g., MO -> TU -> WE -> ... -> MO WE FR -> ... -> MO TU WE TH FR SA SU).
3. Set On Time (Hour): Press the 'HOUR' button to set the hour for the "ON" event.
4. Set On Time (Minute): Press the 'MIN' button to set the minute for the "ON" event.
5. Set Off Time (Hour): Press the 'PROG' button to advance to "1OFF". Press the 'HOUR' button to set the hour for the "OFF" event.
6. Set Off Time (Minute): Press the 'MIN' button to set the minute for the "OFF" event.
7. Select Days for Off Time (Optional): If different from the ON time, press the 'WEEK' button to select the desired days for the "OFF" event.
8. Add More Programs: Press the 'PROG' button to advance to the next on/off setting position (e.g., "2ON", "2OFF") and repeat steps 2-7. The timer supports up to 10 ON/OFF programs.
9. Exit Setting Mode: Press the 'CLOCK' button to exit the setting mode. The timer is now ready for use when plugged into a powered outlet.

Reviewing and Canceling Programs:

To review programs, press the 'PROG' button repeatedly. To cancel a setting, use the 'DEL' button. Pressing 'DEL' again will restore the setting.

Daylight Saving Time (DST):

To switch between Standard Time and Daylight-Saving Time, press and hold the 'CLOCK' button for 3 seconds. An 'S' will appear on the screen, and the clock will advance by 1 hour when in DST.

Operating Modes (Manual Control):

Pressing the 'MODE' button cycles through different operating modes:

• ON: The appliance is continuously ON. The red LED indicator is on.
• AUTO: The timer operates according to the programmed schedule.
• OFF: The appliance is continuously OFF. The red LED indicator is off.
• AUTO ON: The timer is currently ON, but will switch to AUTO mode at the next programmed OFF event.
• AUTO OFF: The timer is currently OFF, but will switch to AUTO mode at the next programmed ON event.

Anti-theft Random Function:

When in random mode, the timer will turn on and off with a 10-42 minute variation based on the on and off schedules you set. This is especially useful during vacations to simulate occupancy.

1. Set up an on-off program.
2. Make sure the screen is in AUTO mode.
3. Long-press the 'HOUR' button for 3 seconds to activate the random function. A 'd' will be displayed.
4. To cancel, long-press the 'HOUR' button for 3 seconds.

Countdown Function (1 minute to 5999 minutes):

This function allows the timer to turn on or off after a specified period.

1. Press and hold the 'PROG' button to enter countdown mode. The screen will show 'd--:--'.
2. Press the 'HOUR' button to set the hour for the countdown.
3. Press the 'MIN' button to set the minute for the countdown.
4. Press the 'MODE' button to choose whether the timer will turn ON or OFF after the countdown.
5. Press the 'CLOCK' button to exit.

Important Usage Notes:

• If the timer is plugged into an outlet and the current time falls within a programmed off interval, it will remain off until the next on interval. To immediately turn it on, manually switch to ON mode, then back to AUTO.
• The timer may not come on immediately if the digital clock time falls between any on-off interval you set. Instead, it will stay off until the next on-off interval begins.

Important Technical Specifications

• Installation Type: Plug-in type
• Voltage: 125V~60Hz
• Rating: 125V~AC / 15A / 1250W
• Operating Temperatures: -14°F ~ +104°F
• Accuracy: +/- 1 minute per month
• Battery: NiMH 2V>100 Days (internal battery for retaining settings)
• Package Contents: 2 X Digital Timer Switch, 1 X Instruction Manual

Maintenance Features

• Warranty: 12-month limited warranty. For issues, contact enoverus@foxmail.com with your order number and issue description for a refund or replacement.
• Troubleshooting: For setup difficulties, email enoverus@foxmail.com with your desired schedule and days for assistance.
• Safety:
  • Keep the manual in a safe place.
  • DO NOT plug in appliances exceeding 15 Amps.
  • DO NOT use with heaters, pet feeders, or similar appliances that should not be left unattended.
  • DO NOT attempt to repair, disassemble, or modify the device.

TOGOAL GET06A-US Specifications

General

Brand	TOGOAL
Model	GET06A-US
Category	Timer
Language	English