ENGINE OPERATION34
7
falling down or causing passenger(s) to be
thrown overboard.
Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1. Stop switch lock
2. Set the control lever in the Neutral
position.
1. Shift lever
3. Set the throttle grip to START posi-
tion.
1. Throttle grip
(For manual starter type)
This engine is equipped with a compres-
sion release mechanism.
4. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly. repeat if necessary until
started.
1. Slowly
2. Quickly
3. Starter handle
To Next Page
Loading...
