Toku TNB-6E - User Manual

Unsafe use of this machine may cause serious injury of death.
Operators and maintenance personnel must read this manual
before operating or maintaining this machine. This manual should
be kept near the machine for reference and periodically reviewed
by all personnel who will come into contact with it.
Hydraulic Breaker
TNB-08M
TNB-6M
TNB-27K/190LU2
TNB-1M
TNB-6E
TNB-230LU2
TNB-2M
TNB-7J
TNB-310LU1
TNB-3MB
TNB-16K/110
TNB-60K/400LU2
TNB-4M
TNB-141LU
TNB-5M
TNB-151LU2
M A N U A L
INSTRUCTION MANUAL
TOKU PNEUMATIC CO., LTD.
No.17
WARNING

Summary

Introduction to Hydraulic Breaker Operation

0-1. Safety Information

Explains safety messages and labels used in the manual and on the machine.

Safety Precautions for Hydraulic Breakers

1-1. General Precautions for Safety

Outlines general safety rules, including work site rules and personal protective equipment.

1-2. Safety Operation

Covers safe operating practices, work site safety, and avoiding hazards during use.

1-3. Precaution for Maintenance

Details precautions to take before and during maintenance activities.

1-4. Precautions for Lifting the Hydraulic Breaker

Provides guidelines and warnings for safely lifting the hydraulic breaker.

Hydraulic Breaker Operation Procedures

2-1. Specifications

2-2. Principle Operation

2-6. Installation of the Hydraulic Breaker onto the Excavator

Provides step-by-step instructions for mounting the breaker onto an excavator.

2-7. Installation of Chisel

Details the procedure for installing the chisel into the breaker.

2-8. Replacement of Chisel

2-9. Lubrication of Chisel

2-10. Inspection Prior to Operation

2-11. Test Run

2-12. Operation of Hydraulic Breaker

Explains how to operate the hydraulic breaker correctly and safely.

2-13. Precautions During Operation

Lists critical warnings and precautions to avoid damage and ensure safety during operation.

2-14. Dismantling the Breaker

Maintenance and Inspection Procedures

3-1 Daily Check, Periodic Inspection, and Regular Maintenance

3-2. Inspection for Looseness and Retightening of Bolts and Nuts

3-7. Inspection of Nitrogen Gas Pressure and Recharge

Trouble Shooting Guide

5-1. Oil Leakage

Helps identify causes and countermeasures for oil leakage from the breaker.

5-2. Nitrogen Gas Leakage

5-3. Poor Operation of Breaker

Provides solutions for common issues causing poor breaker performance.

Toku TNB-6E Specifications

General

Model	TNB-6E
Category	Power Tool
Tool Type	Needle Scaler
Weight	2.6 kg
Type	Pneumatic
Power Source	Air