To Next PageTo Next PageWhat to do if OUT1 or OUT2 LED is flashing on Tokyo Keiki ESW Switch?
If the OUT1 or OUT2 LED is flashing on your Tokyo Keiki Switch, it indicates an overloaded comparator. To resolve this, reduce the load current below the rated value. For error recovery, turn the power ON again.
Why is the power source LED flashing rapidly on my Tokyo Keiki Switch?
If the power source LED on your Tokyo Keiki Switch is flashing at a high rate, it means the applied pressure is beyond the measurement range. Specifically, the pressure is less than –10% F.S. or exceeds 110% F.S. Readjust the applied pressure to ensure it falls within the correct range.
Why is the battery draining so fast on my Tokyo Keiki Switch when it's not being used?
If the battery power on your Tokyo Keiki Switch is being consumed quickly when not in use, it's likely that the power switch is not turned OFF and the device is in Sleep mode. Check the status of the power switch and turn it off to conserve battery.
Why is the recharging LED flashing rapidly on my Tokyo Keiki ESW Switch?
If the Recharging LED is flashing rapidly on your Tokyo Keiki Switch, it indicates an attempt to recharge alkaline batteries. Disconnect the USB cable and verify the battery type.
Why is the recharging LED not lighting on my Tokyo Keiki ESW Switch?
If the Recharging LED doesn't light even when attempting to recharge your Tokyo Keiki Switch with a USB cable, the power switch is likely turned OFF. Check the power switch and turn it ON.
Why is the power source LED flashing white on my Tokyo Keiki ESW?
If the power source LED on your Tokyo Keiki Switch is flashing white, it indicates that the device is receiving IR communication. Maintain a greater distance between the Setting Unit and other IR communication devices.
What does “NON” displayed during MEMORY mode copy mean on Tokyo Keiki Switch?
If your Tokyo Keiki Switch displays “NON” during MEMORY mode copy, it means there is no data to be copied. Move to the setting mode, establish IR communication to the Pressure Switch with 'SEARCH'.
What does a blanked out, blinking battery life indicator mean on my Tokyo Keiki Switch?
If the battery life indicator on your Tokyo Keiki Switch is blanked out and blinking, it indicates a drop in battery voltage. If using alkaline batteries, replace them. If using nickel-hydride batteries, recharge or replace them.
General| Brand | Tokyo Keiki |
|---|---|
| Model | ESW Series |
| Category | Switch |
| Language | English |
Defines warning and caution symbols used in the manual for hazardous situations.
Outlines essential safety guidelines for handling electronic devices and preventing damage or injury.
Provides safety instructions for installing pressure switches, including wiring and liquid handling.
Details safety measures for electrical connections, emphasizing energized components.
Advises on safe operation, specifically mentioning battery usage for setting units.
Lists locations to avoid for storing products to prevent failure or damage.
Explains the purpose and target audience of the instruction manual for ESW Series products.
Highlights key recommendations for reading and maintaining the instruction manual for proper use.
Lists essential precautions to ensure the longevity and integrity of the electronic pressure switch.
Introduces the ESW Series electronic pressure switch and its setting unit, highlighting features and functions.
Details the structure and meaning of model codes for the ESW Pressure Switch and ESWS Setting Unit.
Provides a brief description of the electronic pressure switch and its setting device.
Illustrates the physical dimensions and component names for the Pressure Switch and Setting Unit.
Lists detailed technical specifications for the ESW Series electronic pressure switch.
Outlines the default configuration values for the Pressure Switch and Setting Unit.
Describes the operational capabilities and features of the electronic pressure switch.
Details the various functions and operations performed by the ESWS Setting Unit.
Provides guidance on the correct physical installation of the pressure switch.
Details recommendations for connecting the pressure switch to a fluid line, including torque.
Explains how to connect the M12 connector and general wiring practices.
Illustrates common wiring configurations for NPN and PNP open collector outputs.
Presents a flowchart illustrating the sequence of operations for setting and measurement.
Describes the controls and display functions of the ESWS Setting Unit.
Lists and describes various operational procedures for the pressure switch and setting unit.
