EasyManua.ls Logo

tomado TWD2501B - Problems & Solutions; Recycling

tomado TWD2501B
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 15
RECYCLING
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU). Observe
the rules that apply in your country for the separated collecon of electric and electronic products. Correct disposal
of the product prevents negave consequences for the environment and for public health. The packaging material
of this product can be recycled 100%, return packaging material separately.
STORAGE
Empty the water reservoir in the sink and clean the hot water dispenser before storing it. Preferably store it in the original box
to prevent corrosion and damage as a result of moisture.
PROBLEMS & SOLUTIONS
If there is a problem, please rst check the following soluons before contacng customer service.
Problem Possiblecause Soluon
The ow-through speed has
reduced.
Scaling reduces the heang speed. The appliance must be de-scaled.
The green indicator led ashes. Aer 10 hours of use, it is me
to de-scale the appliance.
De-scale the appliance as described
above. Aer de-scaling, hold down
the ON/OFF buon for 5 seconds
to stop the green indicator led
from ashing
Water is leaking from under
the appliance.
The rubber cap on the boom has
not been properly ghtened.
Properly ghten the rubber cap
at the boom.
The appliance no longer works. It is possible that the overheang
safety device has been acvated.
Use a small pin to press down
the reset buon in the top right side
of the recess at the front, in order
to reset the appliance.
11

Related product manuals