TOMATECH CHC-200F User Manual

2
SAFETY：
Please read this manual fully before use CHC-200F
DO NOT open cabinet of THC unless trained
technician. DO NOT adjust the sealed resister.
Turn off Powersupply if when THC is
unused. DO NOT put liquid on THC.
Attention Anti-dust work, DO NOT let metal dust into
THC. DO NOT use on plasma over 100A or HF plasma
Installation Note：
CHC-200F uses AC24V
GND Port must be well grounded, GND
resister≤1Ω. UP/DOWN on THC must be same to
Z-axis Lifter
IMPORTANT NOTE ：
All our THCs have been tested in our workshop before delivery, all
commissioning work has been done. Please NOT change the setting
without informing your supplier.

TOMATECH CHC-200F Specifications

General

Brand	TOMATECH
Model	CHC-200F
Category	Controller
Language	English