VANISH Operator’s Manual Page 63
2WD/4WD SELECTION SWITCH
The 2WD/4WD selection switch is used for changing the
manner in which motor power is supplied to the wheels. Select
2WD/4WD according to surface conditions. 4WD provides
more traction in slippery conditions. To engage 4WD release
accelerator pedal and press 4WD switch to return to 2WD
release accelerator pedal and press 2WD switch.
Never operate 4WD on pavement or above 15 mph as •
drivetrain damage may occur.
Steering effort is increased in 4WD.
•
It is normal for front differential to make more noise •
when in 4WD due to engagement of drive gears.
To Next Page
Loading...
