TOMLOV CPE8881 User Manual

Access Wireless Bridge Via Computer:
1. Before accessing, please make sure that you have set the computer IP address and the
network segment of the wireless bridge IP to be the same. Please refer to the manual to
modify the computer IP address step or Google searches how to modify the computer IP
address, it is very simple.
2. To configure the wireless bridge, open a web browser. In the address bar of the web
browser, enter 192.168.161.xxx and hit enter.
3. A login screen will appear, By default, the username of the wireless bridge is "admin" and
the password is "admin". Enter the current username and password of the CPE and then click
Login. (System language-English)
Pairing Master CPE and slave CPE Via Computer:
1. Bridge Mode: Setting CPE master mode as AP mode, slave mode as Client mode. Click "
Scan" in the settings of the slave mode, scan to the CPE SSID of the master mode to be
connected, and then make the connection settings.

TOMLOV CPE8881 Specifications

General

Brand	TOMLOV
Model	CPE8881
Category	Wireless Access Point
Language	English