Press the start/stop button again. The red light will go out and the green light will flash. If this button is
not pressed within 2 minutes of the hot water being dispensed a long beep will sound. If the alarm
sounds you should discard the feed and repeat the process from step 1.
Wait whilst the remainder of water is dispensed. Once completed, there will be a double beep and the
green light will change to solid.
Always check that the amount dispensed is consistent with the size of feed you have selected on the
dial. Add the sterilised teat, screw ring and hood and shake.
For your child’s safety always check food temperature before feeding by testing on a sensitive part of
your skin.
To Next Page
Loading...
