17
Transmission Chain Adjustment
The chain tension should be adjusted so that the chain yields 10 mm up
or down under pressure (Fig. 13). Adjust the chain tension by spinning
the chain tension adjuster (27, Fig. 3) on the rear wheel axle. After the
adjustment, retighten the nuts on the both side of axle that were party
released for the adjusting.
Bolt and Nut Tightness
Periodically check and retighten as necessary the bolts and nuts of the
main vehicle components (wheels, handlebar, shock absorber, rear
fork axis, engine to frame bolts, gearbox oil drain plug).
To Next Page
Loading...