TomTom BRIDGE - Installing the TomTom BRIDGE Hub

11
 L - External GPS antenna
Note: The available interfaces depend on the hardware configuration.
A range of accessories are available, including the following:
 Full cable harness, for example, external camera, CAN.
 CLA power cable.
 External antennas for 4G-LTE and GPS.
Visit the TomTom BRIDGE website for more information at tomtom.com/bridge
Installing your TomTom BRIDGE Hub in your vehicle
Important: Installation of the TomTom BRIDGE Hub should be carried out by a professional
installer.
1. Mount the BRIDGE Hub on a flat surface in the vehicle using screws, adhesive strips or cable
ties: