Symbol shown in
route bar
Speed trap hotspots - this type of warning shows
places where speed traps are often used.
Average speed cameras - these types of
cameras measure your average speed between
two points. You are warned at the start and end
of the average speed zone.
While you are driving in an average speed zone,
your average speed is shown, instead of your
current speed. The distance to the end of the
area is shown in the route bar.
Speed enforcement zones - these zones can
contain multiple safety cameras.
You are warned at the start and end of a speed
enforcement zone. While you are driving in a
speed enforcement zone, your current speed is
shown, and a visual warning is shown in the
route bar.
Red light camera - this type of camera checks
for vehicles breaking traffic rules at traffic
lights. There are two types of red light camera -
those which check if you drive through a red
light and those which check for driving through a
red light together with speeding.
Traffic restriction - this type of warning warns
you about restricted roads.
Accident hotspot - this type of warning is given
for a place where road traffic accidents have
historically been concentrated.
You are warned at the start and end of the
accident blackspot. While you are driving in an
accident hotspot, your current speed is shown
and a visual warning is shown in the route bar.
Changing the way you are warned
To change the way you are warned about safety cameras, select the Sounds and Warnings button in
the Settings menu.
You can then set how you want to be warned for the different types of cameras and safety hazards.
You can change settings for whether you want to be warned, never warned or warned only if you
are speeding.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
