Turn off map display/Turn on map Turn off map display/Turn on map displaydisplay
Above a specified speed, for safety reasons, the main map view can be replaced by a 'schematic'
view, focused on the next driving instruction. You can choose to use this feature by choosing 'Turn
off map display' . Select 'Above certain speed' to specify a cut-off speed, or 'Always' to have
the schematic view shown at all speeds. Choose 'Turn on map display' to always show the
map again.
Note the way the distance to the upcoming turn information is shown in the bottom-left of
the screen.
Hide POI/Show POIHide POI/Show POI
You'll find it useful to just show specific categories of Points Of Interest (POI) on the navigation and
map views, using the preference ' 'Manage POI'. Once you've spent time carefully browsing through
the categories and choosing the ones you need, you can hide all of them from the main navigation
view in one stroke with 'Hide POI' or show your preferred set again with 'Show POI'
.
Turn off sound/Turn on soundTurn off sound/Turn on sound
You can turn off the voice that gives navigation instructions by choosing 'Turn off sound' .
This is indicated during navigation by the icon in the lower left-hand corner of the screen. To
turn the voice instructions back on again, select 'Turn on sound' .
To change the volume of the spoken instructions, use 'Volume preferences'. To select another voice (i.e.
gender and/or language), use the preference 'Switch language'.
Volume preferencesVolume preferences
You can change the volume of the voice instructions by using 'Volume preferences' , with
its sliding scale to set the required volume in increments of 5%. The 'Test' function is a good way to
get the volume right before starting your journey.
You may also find it helpful to use 'Link volume to car speed', so that the voice instructions get
louder as road noise increases and are at their quietest when you are stationary.
Manage favoritesManage favorites
In time, you may want to use 'Manage favorites' to delete any favorite locations that are
no longer needed. You can also rename them, if you wish. Use and to scroll up and down the
list and pick the one you want to change or delete.
To Next Page
Loading...
Need help?
General
