TomTom RIDER User Manual

12
•
•
•
•
•
•
2. Wrap the piece of rubber provided around the handlebars to make the
handlebars thick enough for the Handlebar Mount. Cut the piece of rubber
to adjust the thickness.
3. Place the Handlebar Mount around the handlebars and over the piece of
rubber.
4. Screw the Handlebar mount together tightly using the Allen key provided.
5. Screw the Holder to the Handlebar Mount using four of the small screws
included with the mounting kit.
If your TomTom RIDER is not in a comfortable position, unscrew the
Handlebar Mount slightly and adjust the angle of the mount and the holder.
Then screw the Handlebar Mount together tightly again.
You can now place your TomTom RIDER in the Holder. See this section:
Placing your TomTom RIDER in the Holder on page 15.
Handlebar adaptor
The Handlebar Adaptor is secured by bolts next to the grip, as shown.
Note: The piece of rubber helps prevent vibration and stops the Handlebar
Mount from slipping while you are driving.

TomTom RIDER Specifications

General

Marine (chartplotters, sounders)	No
Languages support	Multi
Map coverage	All Europe
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	4:3
Storage media type	Flash
Compatible memory cards	Not supported
Form factor	Fixed
Product color	Black
Text-to-speech message reader	-
USB 2.0 ports quantity	1
Power source type	Battery
Battery life (max)	6 h

Weight and Dimensions

Depth	53 mm
Width	130 mm
Height	101 mm
Weight	353 g